Locate the power connectors, which must be 6- or 8-pin connectors, and then connect them. Use two of the 4-pin Molex power connections if your power connector does not have any 8-pin connectors. Connect the GPU to the power connector. After turning on the computer, verify the connections once more and GPU performance.

How to Connect Graphics Card to PSU

If you enjoy playing video games, you should be aware that having a computer, internet, and games is not sufficient. For the finest gaming performance and stunning graphics, you must purchase a GPU. After being integrated into the motherboard, the GPU requires a power source to function. And the PSU is what supplies the electricity.

Most individuals have no idea of how to connect a GPU to a PSU. The simplest process is connecting the GPU to the power supply, and if you follow a clear process, you may complete it in a few minutes.

Since their PSU is sort of integrated into or built into their motherboard, integrated GPU does not require you to work harder. However, since dedicated GPUs have independent hardware components, PCIe cable is utilized to link them to their power supplies. Performance is superior for dedicated GPU users compared to integrated GPU users.

The dedicated GPU user should use this process.

Requirements

There are a few things you must have when connecting the GPU to PSU:

  • PCIe x16 slot on the motherboard.

  • Screwdriver.

  • Graphics card.

  • PSU.

  • 6-pin or 8-pin power connectors.

Method to Connect GPU to PSU

The specific steps are given further down.

Locate PCIe Slot and Install GPU

Step 1: Shut down your computer and unplug all of the wires. Apply a screwdriver to the computer case to open it up. then get to the PC's motherboard.

Step 2: Next, find the motherboard's PCIe slot. The PCIe slot is where you insert your GPU.

Connecting the dedicated GPU to the power source is a little more difficult.

Step 3: Find the PCIe slot, insert the GPU, and tighten it down.

Locate Power Connectors

Step 4: Find the power connectors on your GPU. There are often an 8-pin and a 6-pin connector.

Step 5: If your power connector does not have 8-pin connectors, use two 4-pin Molex connectors. They frequently exist in addition to the PSU's bottom.

Molex Power connectors are another name for Molex connectors. Typically, we utilize it for hardware like hard disks, case fans, and so forth.

Connect GPU to PSU

Step 6: Connect the power connectors to the GPU after identifying them.

Step 7: If you're using 8-pin connectors, you can attach them using either a single 6-pin connector or two 4-pin Molex connectors.

Ensure the Accuracy

Congratulations if you finished all of the aforementioned steps! Your PSU was connected to your GPU. All that's left to do is verify that your process was accurate.

Step 8: Confirm all connections by checking them at least twice.

Step 9: After the computer has started, check to see if your GPU is functioning properly. If so, the procedure was successfully finished.

FAQs

1. Which GPU type performs best?

Compared to integrated graphics cards, dedicated graphics cards are more expensive. They cost more, but they perform far better than integrated graphics cards. So, they are worthwhile to invest in.

2. Which tools are required to connect the GPU to the PSU?

The only equipment required to remove the computer case and secure the graphics card to the motherboard is a magnetic screwdriver.

3. What happens if the computer won't boot after using 8-pin power connectors?

If something is wrong, shut down your computer and check all the connections again. After that, restart the computer and wait for a while. Then your problem is resolved.

If the problem persists, seek assistance from a specialist.

4. How can I make sure my GPU and PSU are properly connected?

Recheck the connections of the power connectors after attaching the GPU to the PSU, and then turn on your computer. Check to see if your GPU is operating properly.

If your GPU functions properly, everything you did was correct. If not, a professional strategy is required.

Final Thought

You see? How easy is that?

Now that you've read this guide, you're ready to connect your GPU to PSU. Just follow the straightforward process; there is no hard and fast rule. You must master these basic abilities in order to work with high-quality GPUs that perform well.

I made a great effort to explain things clearly. Simply post your questions in the comments section if you have any.